4 Advantages and Disadvantages of Using a Plastic Water Tank in India?

Food-grade plastic that is non-toxic and suitable for the storage of drinking water is used to make plastic water storage tanks. Even thicker than the plastic used for sodas and other drinks, water tanks employ plastic. The harmful chemicals that are introduced during the manufacturing process are the major cause of concern with plastic tanks. Go for the best-quality plastic water tank in India. You can be confident that the water within your plastic water storage tank is safe to drink as long as it has been installed and maintained correctly. Given below are the four advantages of using a plastic water storage tank:

1. Plastic water tanks are lighter.

Steel tanks require a crane to be moved onto your property since they are much heavier than plastic tanks.

2. Simpler to place

Before installing a steel tank, the surface must undergo extensive preparation. To prevent corrosion, the bottom may be protected by concrete and expensive steel rings.

3. A larger selection

They have cone-shaped roofs. Although the diameter may vary, the fundamental form remains the same. You may go for the Penguin Tank, the best water tank in West Bengal.

4. Adapt more naturally to the environment.

Steel tanks are available in fewer colors than plastic tanks.

 

Now have a look at these 4 disadvantages of domestic water storage tanks:

1.    Unsustainable

Plastic, as we all know, typically takes between 10 and 1000 years to break down. We may infer from the size and thickness of a plastic tank that the time it takes to decay is at the end of that range.

2. Colour fading

Although you may choose from a variety of hues when you first buy your tank, the color may start to fade after a few years of contact with sunlight and other weathering elements.

3. Warm water

Plastic water tanks in shades of black and deep blue are infamous for heating their contents. This might be dangerous if you use the water in your storage tank as drinking water.

4. Tough to carry

Despite being lightweight, plastic water tanks are not necessarily easy to move. The majority of water tanks are produced as a single unit; therefore, there are no seams, etc.

It can be concluded that plastic water tanks in India have both advantages and disadvantages. The location and planned purpose will determine the best option. Plastic water tanks are only appropriate for homes and small enterprises, even though they are more affordable, aesthetically pleasing, widely accessible, and easy to move.

 

Also Read: 3 Reasons Why The Water Storage Tanks Should Be Cleaned And Disinfected?

Concrete Vs Plastic Water Storage Tanks- Make A Right Choice

 Pure, fresh, and hygienic 24×7 water supply is a bare minimum requirement for every household. And, this quintessential need of a household makes a water storage tank a key essential element that every family needs to figure out the nitty-gritty of how potential, safe, eco-friendly, convenient along with a bundle of other necessary parameters, it is! However, there are majorly four types of overhead water storage tanks available in the market- Steel tanks, Fiberglass Tanks, Plastic Tanks, and Concrete Tanks. Among these four, the latter two are the most commonly used water storage tanks in residential areas. Both types of water tanks offer their own pros and cons. Let Penguin Tank, the most recommended Water Tank Manufacturer in West Bengal discuss some points in order to understand each of them a little more in detail for drawing the conclusion of which is the more preferable one.

 

Concrete tanks- Made of some highly durable materials and been in public use for centuries, concrete tanks are very much durable and can easily be fashioned into a preferable shape that helps builders keep various environmental and geological considerations in mind. 

    • Pros: 

    • Since these tanks are made of reinforced cement concrete (RCC) or ferrocement, concrete tanks are no-doubted the most durable tanks. 

    • Concrete water storage tanks keep the water temperature stable even in extremely high temperatures.

    • Cons: 

    • Leaking of water is a very common problem in concrete tanks. Often it is ironically said that the strength of a concrete tank doubles up its weakness. Since a concrete tank is strong and durable, it is also porous giving in to more frequent cracks and leakages followed by expensive repairs. Therefore, it requires high maintenance. 

    • It is no less than a nightmare when it comes to transportation, installation, or post-installation repair work of concrete tanks. 

Plastic tanks- Made of high-quality polyethylene, plastic water storage tanks are widely used by consumers nowadays. 

    • Pros: 

    • Plastic tanks are very lightweight and therefore easy to install.

    • These are non-corrosive and easier to handle if compare with concrete tanks. 

    • Plastic tanks are largely leakproof. Hence, do not require expensive maintenance every now and then.

    • Cons: A plastic water storage tank holds very few complaints. 

    • A plastic tank cannot hold water temperature stable in an extremely hot atmosphere and have a low resistance to UV light. 

Finally, to conclude it can be said that both plastic and concrete water storage tanks come with their own set of pros and cons, while the former appears to be a better choice when provided by a trusted brand. So, explore the entire range of plastic water storage tanks at Penguin Tank. 

Let us Review the Different Stages of Rotational Molding Process in Detail

Rotational moulding or rotomolding is a process of manufacturing seamless hollow plastic products. Products manufactured using this process are extremely strong, long-lasting and durable and can be moulded in desired size and shape. Rotational moulding was first developed in the 20^th century and it was in the early 1960s when it gained wide acceptance. Plastic water storage tanks are manufactured using the rotomolding process which makes it the ideal choice. Rotomolding process is divided into four stages. Let's review the stages in detail.

Stage One: Loading the mould with polyethylene resin

At this stage, the mold is being opened and polyethylene resin is loaded into the mold. The pulverized material, a fine powder form is loaded into the prepared mold. After doing so, the mold is closed properly and rotated outside to ensure no powder is able to escape.

Stage Two: The mold enters the cook cycle while rotating on two axes at a low speed

As the mold is closed and secured, it moves into the heating chamber of the oven while rotating on two axes at a low speed. This is popularly known as the oven’s cook cycle and a standard temperature is maintained within the cook cycle in order to avoid overcooked and undercooked products.

Stage Three: Precooling and cooling of the mold while still rotating

The mold then moves into the cooling chamber and is cooled by air or a water spray or a combination of both while still rotating after a predetermined duration of the pre-cool cycle. This is an integral step to any rotationally molded products.

Stage Four: The final product is removed by unloading the molded product

After the cooling cycle is successfully completed, the mold is taken out of the cooling chamber where it is manually opened. The molded product is then removed from the same at an optimum temperature. The final product is ready to be displayed.

There are a number of materials available for rotational moulding and the most widely used is polyethylene. Plastic water storage tanks have become the top priority of the consumers at present all over the world. The manufacturing method of plastic water storage tanks is an integral part of this process. Penguin Tank is one such name who is manufacturing rotomolding water tanks for both domestic and commercial uses.

What are algae? Know the important facts on Algae.

Algae are photosynthesis organisms that can be found floating on bodies of water. Yes, it is that green stuff that we often see on water bodies floating like ponds, lakes, seas and so on. Although growth of algae in water storage tanks is considered harmful for our use. It is always recommended to buy the best quality water tanks from a renowned manufacturer for domestic and commercial uses. But there is another side of algae.

Let us look at some facts on algae that we might not be aware of.

• Algae are more than 475 million years old on Earth according to fossil records.
• They come in a range of sizes from microscopic Chlorella to massive form like the Giant Kelp.
• Some popular types include seaweeds, phytoplankton, the blue-green algae, pond-scum, algal blooms and so on.
• They are not necessarily always green. They can be found in red, brown and cyan colors too.
• They can be found on snow banks, soils, tree trunks, and hot springs apart from water banks.
• They generate their own food through photosynthesis.
• They play an important role in ecosystems as they produce 70% of the air that we breathe and provide the foundation for the aquatic food chains supporting all fisheries in the ocean. They generate oxygen through Photosynthesis.
• They can reproduce through asexual or vegetative methods and via sexual reproduction.
• They can be used as fertilizers, soil conditioners, and livestock feed.
• Some types of algae provide nutrition. For instance, seaweeds provide many vitamins, iodine, potassium, iron, magnesium, and calcium.
• They are national foods for many countries including Japan, Ireland, Chile, Wales, Korea, Scotland, New Zealand, Greenland, and Iceland.
• Some oils are made from algae that contain high levels of unsaturated fatty acids and omega 3 fatty acids. Some of them include fish oil and flaxseed oil.
• They can treat sewage; filter ponds and aquaria.
• They can create various polymers used to create bioplastics.
• Some natural pigments from algae can be used as an alternative to chemical dyes and coloring agents.

We are sure that you didn't know these extraordinary characteristics and different uses of algae before. Algae has saved the world by cleaning the earth’s atmosphere millions of years ago. They turned the inhospitable atmosphere into one that could support through photosynthesis. They became crude oil by sinking into sea and lake beds. Let's hope that it can save the world again.