How To Maintain Hygiene In Domestic Water Storage Tank ?

Water is one of the basic requirements of all the living things on this planet. No one can do away without water at all. In fact, the survival of living beings is impossible without water. Being the wisest animal on this planet, human beings need water for many daily activities. In this modern age, houses need special water storage facilities where people store water for their daily needs. To make it happen, most of the houses have Plastic Water Storage Tanks that they usually install on the roof of the house and then supply in required parts of it using a network of pipes. 

 

Indeed, these water storage tanks are very useful. Today, a wide array of such tanks are available in the market. They have dissimilar features that make them different from one another. No matter what features they have, one thing goes similar for every one of them. They need proper care so that the water inside those tanks remains safe for domestic as well as commercial use. 

 

Cleaning the tanks is a critical task that people must take care of very sincerely. The following are a few ways of cleaning the Domestic Water Storage Tank: 

 

Empty The Tank Before You Start Cleaning It: 

You should not avoid this step at all. You must allow the water inside it to drain out before you start the cleaning process. Use a clean piece of cloth to drain the water out. 

 

Cleaning Once in Every Six Months Is A Healthy Practice: 

Though not all families can maintain this safety measure, it is necessary to clean the tank once in six months so that the tank remains free from all the harmful contaminants that grow up in the water if it is not cleared properly. Cleaning must be done thoroughly so that the germs may get destroyed inside it. 

 

Use High-Quality Disinfectants To Complete the Cleaning: 

Cleaning the Plastic Water Storage Tank is incomplete if you do not disinfect it using the best quality of disinfectant. Usually, the experts recommend the use of chlorine to complete the disinfection of the tank. 

 

Scrub The Tank With A Clean Scrubber: 

Usually, moss or algae get collected on the inner surface of the tank that does not get removed easily. To get it done, you must use a steel-based scrubber so that these things get removed with relatively less effort.  

 

After the process is complete, flush the tank from inside and again allow the water to drain out. Before you complete the process, you should fix the lead back to its place. 

 
The Closing Line: 

Though experts suggest some more methods of cleaning the Best Quality Plastic Water Tank in India, these steps are the safest ways to clean the tank and to make it safe from all harm in the next few months. You would need to follow these steps to store the water inside the water tanks. 

5 Myths About Water Storage To Know Before Storing Water In A Plastic Water Storage Tank

Storing water is quite different from storing food and thus there are certain things that you should consider. Water should be protected against viruses, contamination, and bacteria. Here are 5 common myths about water storage that you should know before storing water in a plastic water storage tank – 

    • Water can expire – Water does not have an expiry date but it can become contaminated. However, water can get a stale taste but this can be eliminated by purifying the water. Try to store water in an ideal condition. Keep it in a dry and cool place. Do not allow direct sunlight to reach your domestic water storage tank. If you can store water like this, then it can remain in good condition for a long time. Make sure to rotate the water after certain intervals in order to reduce the risk of contamination. 

    • Water can be stored in plastic containers - It is absolutely safe to store water in plastic containers but it should be UV-resistant. Water storage barrels are mostly blue in color. This is because the blue color limits light exposure and eliminate the growth of algae and bacteria within the plastic water storage tank. Tanks made up of polythene are the safest containers to store water. Buy tanks from renowned water tank manufacturers in India as you should never compromise the quality when it is about water. 

    • Water barrel can help you in emergencies – You can store water in a tank for later use and emergency purposes as well. However, if you want to travel from one location to another then you cannot carry a water barrel with you. Also, it is problematic if you have only one barrel of water. If there is any problem with the barrel then you might run out of water until and unless the problem is getting fixed. You should store water in various containers for emergencies.

    • We only need water purifiers  – Water purifiers can kill 99.9% of microorganisms like protozoa, viruses, and bacteria, found in water. Chlorine dioxide is great for treating your water kept in barrels as well as for water collected from streams and ponds. However, it is to be noted that a water purifier cannot remove turbidity from the water. So it is recommended to use both a water purifier and a water filter as well. 

    • Water barrels can be stuck on top of each other – It is not recommended to stack water barrels on top of each other. However, if you want to save your floor space by stacking water barrels, you should use containers with grooves on the bottom for stacking. However, you should not keep your water barrel directly on cement or on your garage floor. Plastic can absorb flavors and chemicals in course of time and this can make the taste of water unbearable to drink. Try to place your barrel on a wooden board. 

These were some of the myths related to water that you should know before installing a plastic water storage tank. However, these are not the only ways to keep your water safe. You should also take good care of your storage tank to maintain the quality of water.

The Process Of Rotational Moulding Of Plastic Water Storage Tank

A plastic water storage tank is the most sought after tanks by families and businesses. This is due to the easy availability, easy installations and the ease of usage of a plastic tank. Not only that these plastic water storage tanks are highly useful in keeping the water stored inside fresh and safe. It is manufactured with ways to prevent the UV rays and the growth of algae. They are also economical and recyclable afterwards. A plastic water storage tank in itself can be used for 10-15 years. Their manufacturing process makes it possible for you to use it for a long time. this manufacturing process is known as the rotational moulding process. Also known as rotomoulding process, it is used to manufacture hollow plastic products. It is the best way to manufacture plastic water storage tanks. Here are the steps that will explain how this process is executed.

    1. The first step is to prepare the powder in which the polyethene materials granules are mixed with a black colour concentrator. To get a uniform distribution of carbon black this formula is chopped. 

    2. After the powder is ready, you can insert it in the mould by following the right amount. The machine of rotational moulding is heated around 300-degree Celsius. To form a uniform layer of plastic, the mould is then rotated in a certain low speed. 

    3. Once the heat is generated, the plastic starts to surround in the mould and it gradually agglutinates the mould. With this step, the mould forms a monolithic layer against the mould surface. 

    4. The mould rotation continues until the plastic coagulates and then it reaches the cooling process. Once the cooling process is done the plastic forms into a solid form. The mould rotation is then stopped and the plastic water storage tank is carefully removed from the mould. 

    5. The last step is quality check where every product is checked thoroughly before it is sold in the market. 

The rotational moulding is not just used for manufacturing plastic water storage tank but also everything plastics like medical products and toys. One thing a user should know that even though there are several ways of manufacturing a plastic water storage tank, rotational moulding is the best way to do it. Whether it’s for domestic use or commercial use, you should ask your manufacturer which process has been used. So, use only the best kind of plastic water storage tank for your purposes.

Steps To Install A Domestic Water Storage Tank On Your Roof

A domestic water storage tank is one of the most essential things to buy and install in a home. If you want to use it for all kinds of household chores, you need to make sure that it is capable enough to supply water to the whole house. But after buying comes the installation process. If you have chosen a plastic water storage tank for your home, you should also know that it is quite easy to install. If you want, you can even install it yourself. That’s why we have given a very simple three-step installation process for you to follow. Take a look.

The base of the tank should be prepared

First and foremost, you will need to make a base for the tank where you will be able to put it. A base of the tank can be of two types. One is a concrete base and the other one is compacted material base.

If you want to make a concrete base, you will first need a three-inch reinforced concrete slab that has been levelled properly. The diameter or the dimension of the base should be bigger than the size of your tank. Ensure that the base is sturdy enough to hold the tank properly for a long time.

On the other hand, if you want to go with the second option, you will need to create a three-inch pad of compacted road base. This base should be 24 inches larger than the diameter of the water tank. Make sure that there are no rocks or stones or anything sharp that would damage the tank. Make it thoroughly compacted and the outside of the base should be supported so that erosion does not occur.

The overflow drainage pipe should be fitted

If you purchased your domestic water storage tank from a well-known company, then your fitting may already be installed unless otherwise specified. Your piping is going to supply the water to the whole home, so there should not be any mistake. Your drainage system will be needed to fit the piping properly. So, fit them where the water drained out will not undermine the base.

The fill pipes should be installed from the roof

Next thing you should do is to fit your pipe that goes from your tank lid to your roof. If you are using the water in your tank for drinking also then you need to speak to the professional to make sure your water for drinking is filtered properly. You must make sure that the filter basket is in its required place in the lid of your water tank.

These three steps are the only thing that you need to make sure is followed meticulously without any mistake. And then your domestic water storage tank will ready for use.

In this slideshow you know the process of a new Plastic water storage tank installation.

How To Install a New Water Storage Tank ? from PenguinTank

Rotomoding Water Tanks: How Much Does It Really Help?

We all know water is the most essential daily requirement in the whole world. From domestic to commercial, we use water for every purpose. This is why storing water efficiently is also a very basic necessity. For years we have tried to store water in such a way so that the water will stay healthy, fresh and cool. Our basic requirement of making plastic storage water tank has been the very same reason. But like everything else, these plastic water storage tanks have advanced a lot too. In order to keep the water free from bacteria, contamination and virus, rotomolding water tanks are manufactured and used nowadays. They are also of excellent designs and offers a lot of economic advantages. 

There are several features of these rotomolded tanks. They come in various shapes and sizes with a wide range of designs. The most important feature is that it has no seams, which means it is made of only one piece of plastic. This is possible in rotomolding technique as they are manufactured with high-quality raw materials. The one-piece of plastic means that it is quite durable and less likely to fall apart or break, unlike other types of tanks. This tank can withstand high pressure as it has thick walls. 

Another advantage of this type of tank is that they are easy to maintain. Due to its features of the plastic, it protects the water from UV rays, can endure any type of gas, chemicals, and other dangerous materials. This, in turn, means the water will remain cool and fresh for a very long time, and you won’t have to clean it frequently. 

As it is made of one piece of plastic, it considerably reduces its weight compared to other tanks making it lightweight. If your plastic water storage tank is lightweight, that means, you will be able to install it easily or move it from one place to another without any fear of damage. 

We all have become quite aware of our environment. A lot of people try to quit things that can harm the environment. For those people, you will be happy to know that the manufacturing technique is environment-friendly. The plastic of the tank requires less fuel during manufacturing and is fully recyclable. This is why, during the manufacturing process, no chemicals, toxins or gases are released. 

We all like to save money when making a purchase. So you will also be pleased to know that a rotomolding tank is quite affordable as it has a very low-cost production process, as mentioned above. Due to the large scale production, the cost of the tank is also lowered. 

So, if you are looking for a plastic water storage tank, a rotomolding tank would be the best bet. 

Why You Should Go For MAXX Foam Plastic Water Storage Tank?

Given much thought about your water tank at home lately? Do you use a domestic water storage tank? If yes, then which one? There are so types of plastic water storage tanks out there, but which one would be the best for you? One such type of tank is MAXX 5 foam tank, which has become quite popular over the years. Read on to find out why you should go for this tank and why it has become so popular. 

The Maxx 5 foam water tank is rotomolded that has been after a lot of research and development. It keeps the water fresh and safe for a very long period of time, which makes it a very special product. With the capacity of 500 litres of water, it stays effective and durable even in extreme conditions. It is an ideal choice for every domestic household. It also has other special features and a lot of layers which we have given below. 

Food grade inner layer

Starting from the innermost layer, it is made of food-grade material. This type of material is used mainly in food containers to keep the food safe. So, when the same material is used in a water tank, it is safe to say that the water will remain fresh for long hours. If properly maintained you can use this water for drinking too. 

Insulated foam layer

After the food-grade layer, it has two insulated foam layer. This double foam layer provides double insulation which has got a higher capacity to keep water cooler at the most extreme climatic conditions. It is made with unique sun shield technology. This layer makes sure that you will be able to cool water for bath even during hot summer. Not only that it also gives the tank extra strength that makes it an unbreakable plastic water storage tank. 

Black middle layer

As the name suggests it comes right after the insulated foam layers and before the outermost layers. It is made of carbon black which makes sure that UV rays can not enter the tank and affect the water in any way. 

UV protected outer layer

Even the outermost layer is also there for UV protection. Most of the sunlight is stopped by this outermost layer itself.

So, basically, a MAXX 5 foam plastic water storage tank is made of a total of five layers that do the work of keeping the water safe and also make the tank strong and durable.

What Is The Meaning Of A Five-Layer Water Storage Tank?

Water storage tanks are essential for everyday use in household, commercial and industrial establishments. A good quality plastic water storage tank is the primary source of water that we use daily to meet all water demands. Water storage tanks come in four different varieties- steel, fiberglass, plastic, and concrete. Here, we refer to plastic water storage tanks because these types are most popular in demand and considered the best at present for different household, commercial and industrial uses. Let us take an example of Maxx 5 Foam Plastic Water Storage Tanks from Penguin Tank. As the name suggests, it is a five-layered tank and considers the best one among the varieties of tanks so far. Now, what exactly is a five-layer water storage tank? Well, it means a tank which has five layers. Let us understand the significance of each layer in detail.

Food Grade Inner Layer: This is the innermost layer of the Penguin plastic water storage tank. With this layer, there is no chance of plastic borne health issues as it is made of high-quality LLDPE (linear low-density polyethylene) material which is BPA free and ideal for storing water for drinking and other purposes. It ensures the safety of water and does not allow it to get contaminated when comes in contact with the tank.

Insulated Foam Layer 1 and 2: The insulated foam layers and 2 maintain the temperature of the water in the changing climatic conditions reducing the heating and cooling time of the water. This tank is considered as ‘The Most Strong and Cool Water Tank’ as this is the best quality available in the water tank industry in India.

Black Middle Layer: This is one of the most important layers as this layer protects the water from the harmful ultraviolet rays of the sun. The UV rays when it comes in direct contact with water give growth to algae. Algae consumption is harmful to health and if consumed by humans, can lead to several health ailments.

UV Protected Outer Layer: This layer is incorporated with The Sunshield Technology which is a high definition cover layer that makes this tank again 100% UV radiation-proof, making it a robust and unbreakable polymer construction and a real value for money.

Therefore, based on the above, Maxx Foam 5 tank is a must-have tank for every household, commercial and industrial property. Buy it now and secure the water that you are using on an everyday basis.